American Scale & Equipment Co., Inc.
American Scale & Equipment Co., Inc.
8839-D Kelso Drive
Baltimore, MD 21221
1-800-BALANCE (225-2623)
Email: info@amscale.com
Print Back
Legal-for-Trade, CC 98-040

IMXT Series includes: 75K alloy steel Easi-Post Weigh Bars® with stainless steel Easi-Post components (threaded cap, post, and lower cup), 50' interface cable, junction boxes, platform ground wires with clamps, surge protection for Weigh Bars® and junction box, and AC line protection for indicator. Interface cable and all Weigh Bar® cable is stainless steel sheathed.

The IMXT series arrives at the installation site in pre-assembled sections. Weigh Bars®, junction boxes and cables are factory calibrated. Final assembly must be done in the field. Final calibration of electronics must be done after the steel decks have been installed.

The IMXT Series truck scales have a concentrated load capacity (CLC) and dual tandem axel capacity (DTA) of 90,000 lb (45,000 kg). The "r" factor rating is 2.65 on all sizes.

IMXT Series: 10-ft. width, 14-in profile (actual platform width 9' 10-1/2")
Unit of Measure

Specifications

Model Number

 N/A IMXT 11610

Capacity

 N/A 270,000 lb135,000 kg

Scale Length

 N/A 115 ft 9 in 35.3 m

Profile

 N/A 14 in

Actual Platform Width

 N/A 9 ft 10-1/2 in

Number of Modules

 N/A 5

Shipping Weight

 N/A 47,636 lb21,607 kg

Options

 N/A (Not bolted on at fatory, will ship on pallet) 1" Riser Plate, (increases foundation"profile" by 1") p/n 50806-0027 50' stainless steel sheathed interface cable Additional stainless steel sheathed interface cable (p/n 48548-0024)
(Non-sheathed 50' standard cable can be substituted at the same price. Additional non-sheathed cable priced per foot - p/n 13761-0028) Anchor bolt, nut & washer - (32 required per 70' scale) p/n 48614-0015 Blue Blanket Warranty (AWT97-501690) For Multi-Platform Systems add individual model prices as required Guide post - 6' long, 6" diameter, Schedule 40 steel pipe, painted yellow (p/n 50656-0010) Guide rail - Bolted, powder-painted yellow, 8" high single rail
(Guide rail option not suitable for shallow or deep pit foundations, never bolted on scales 12' or wider) Manhole ring and cover MSHS Guide rail - Bolted, powder-painted yellow, 24" high double rail Refer to back page for illustration of foundation profiles. Special colors Special lengths and widths Stainless Steel, 75K Easi-Post Weigh Bars® T-Belt, EDPM Rubber, 4-1/2" x 10' (p/n AWT20-508659) T-Belt, EDPM Rubber, 4-1/2" x 11' (p/n AWT20-508660) T-Belt, EDPM Rubber, 4-1/2" x 12' (p/n AWT20-508661) T-iron filler strips (10', 11' or 12' length) for gap between approach and scale end (10 ft. p/n 50898-0018, 11 ft. p/n 50898-0026, 12 ft. p/n 50898-0034)

Illustrations of Foundation Profile

 N/A
[50807-0018] - Pin & Link base plate, standard 14" profile

[50807-0034] - Pin & Link base plate, w/2" riser, (total of 16" profile)

[50807-0042] - Pin & Link base plate, w/4" riser, (total of 18" profile)

[50807-0059] - Pin & Link base plate, w/6" riser, (total of 20" profile)

[56085-0018] - Easi-Post base plate, standard 14" profile

[56145-0016] - Easi-Post base plate, w/ 2" riser, (total of 16" profile)

[56145-0024] - Easi-Post base plate, w/ 4" riser, (total of 18" profile)

[56145-0032] - Easi-Post base plate, w/ 6" riser, (total of 20" profile)

Features

 N/A
  • Maximum surface durability and corrosion prevention
  • Entire modules are hot-dipped
  • Zinc is alloyed to all surfaces , both inside and outside
  • Adds over 1,500 lbs of surface protection (70' x 11' scale)
  • All welding performed prior to galvanizing
  • Meets ASTM 123 standards
  • Surface life expectancy is 30+ years